Dynamic Striptease

High-Performance Chain Stripper and Wax Prep

Switching from oil to (hot) wax, prepping a new chain, or removing built-up wax and dirt? Get a Striptease! No, not for yourself, for your chain! Its powerful formula quickly dissolves stubborn grease, oil, and wax, leaving your drivetrain spotless and optimizing the chain for wax adherence. Whether you're starting fresh or giving your setup a deep clean, Striptease delivers pro-level results with ease.



✔️ Optimizes the adhesion of (hot) wax

✔️ Deep cleans your chain in record time

✔️ 100% Biodegradable and safe for all finishes and materials

✔️ Tested on: Shimano, KMC, SRAM & Campagnolo

✔️ Suitable for new and used chains

There are three ways to apply Striptease, always shake well before use and always rinse the chain with water and allow to dry before waxing or re-lubing. The three options are:



Option 1: Pour in a container and submerge the chain completely. Shake the container with the chain and Striptease for 30 seconds, let sit for 5 minutes, shake again for 30 seconds.



Option 2: Drip Striptease onto the chain without removing the chain from the bicycle, agitate with a brush and wait for 5 minutes.



Option 3: Use Striptease in your ultrasonic cleaner, diluted with water in a ratio of 1:3 (Striptease to water).

Switching to hot wax for peak drivetrain performance means getting the most out of your wax with minimal effort, and it all starts with proper chain prep. Even the slightest grease residue can negatively influence the performance of your chain and the hot wax.

Dynamic Striptease ensures your chain is perfectly prepped for any wax, especially hot wax. Its biodegradable formula removes all factory grease, oil, dirt and old wax, leaving the chain clean and ready for optimal lubrication.

Striptease dissolves contaminants on contact-no harsh scrubbing needed. It starts working in seconds and can clean a full chain in minutes. You can use it in an ultrasonic cleaner for even deeper cleaning.